WaterChiller.Info  >  Water Chillers  >  7.5 Ton Chiller
A Schreiber Chiller

7.5 Ton Chiller

(Air Cooled)
  • Need another size?
  • Need to figure out what size you need?
  • Do you know why you should have a chiller if you are resistance welding?

    Note about the Tonage Ratings:
    The TrueTonTM label assures that every Schreiber Chiller meets or exceeds its stated BTU performance as measured by the American Refrigeration Institute standard testing methods. Be careful, since not all chiller manufacturers test to the same standards.

    Labeled Diagram of a chiller

    Key to chiller components:
    1. 2 -18" Condenser Fans
    2. NEW Electronic Controls with digital display
      1. Temperature Set point
      2. Return and Discharge Temperature Displays
      3. High Temperature Alarm
    3. Low Water Warning Light
    4. Power Disconnect
    5. Chilled Water Return -- 1 1/2" N.P.T.
    6. Water Level Sight Glass
    7. Water Reservoir tank fill -- 1/2" N.P.T.
    8. Chilled Water Discharge -- 1 1/2" N.P.T.
    9. Access Door
    10. Pump Rotation Check

    Chiller Specifications:
    Model Number: 750 AC
    Capacity: 7.5 Ton
    BTU Per Hour: 90,000 BTU/hr
    Fluid Reservoir Capacity: 60 Gallons
    Fluid Circulating Pump: 2 HP
    Pump Specifications: 45 GPM at 50 psi
    Voltage: 230/3 - 460/3
    Amperage: 36.0 - 18.2
    Cabinet Size:
    (W x D x H)
    32 x 60 x 50 inches
    Weight: 1,250 lbs.
    Do not overcharge this, or any, refrigeration system. The refrigeration sight glass is only an indicator of coolant being in the system. The sight glass should never be filled when charging the system, and will always be fuzzy. Overcharging the system will damage the compressor.