WaterChiller.Info  >  Water Chillers  >  1/2, 1, 1.5 Ton Chillers
A Schreiber Chiller

1/2, 1, 1.5 Ton Chillers

(Air Cooled)
 
 
  • Need another size?
  • Need to figure out what size you need?
  • Do you know why you should have a chiller if you are resistance welding?

  •  
    Features:
    Note about the Tonage Ratings:
    The TrueTonTM label assures that every Schreiber Chiller meets or exceeds its stated BTU performance as measured by the American Refrigeration Institute standard testing methods. Be careful, since not all chiller manufacturers test to the same standards.
    TrueTon
     

    Labeled Diagram of a chiller

    Key to chiller components:
    1. 16" Condenser Fan
    2. Water Level Sight Glass
    3. Overflow
    4. Chilled Water Return -- 1" N.P.T.
    5. Dial Thermometer
    6. Pilot Lights for the Compressor and Pump
    7. Temperature Controller
    8. Compressor Switch
    9. Water Pump Switch
    10. Access Door
    11. Chilled Water Discharge -- 1" N.P.T.
    12. Tank Fill -- 1/2" N.P.T.
    13. Tank Drain
    14. Pump Rotation Check

     
    Chiller Specifications:
    Model Number: 50 AC 100 AC 150 AC
    Capacity: 1/2 Ton 1 Ton 1.5 Tons
    BTU Per Hour: 6,000 BTU/hr 12,000 BTU/hr 18,000 BTU/hr
    Fluid Reservoir Capacity: 20 Gallons
    Fluid Circulating Pump: 1/2 HP
    Pump Specifications: 20 GPM at 24.8 psi
    Voltage: 115/1 - 230/1 230/1 - 230/3 - 460/3 230/3 or 460/3
    Amperage: 30.0 - 14.0 18.0 - 11.0 - 6.0 11.0 - 6.0
    Cabinet Size:
    (W x D x H)
    26.5 x 32.5 x 34.25 inches
    Weight: 400 lbs. 432 lbs. 460 lbs.
    Caution:
    Do not overcharge this, or any, refrigeration system. The refrigeration sight glass is only an indicator of coolant being in the system. The sight glass should never be filled when charging the system, and will always be fuzzy. Overcharging the system will damage the compressor.