WaterChiller.Info  >  Water Chillers  >  12.5 Ton Chiller
A 12.5 Ton Schreiber Chiller

12.5 Ton Chiller

Schreiber Model 1250 AC
(Air Cooled)
  • Need another size?
  • Need to figure out what size you need?
  • Do you know why you should have a chiller if you are resistance welding?

    Note about the Tonage Ratings:
    The TrueTonTM label assures that every Schreiber Chiller meets or exceeds its stated BTU performance as measured by the American Refrigeration Institute standard testing methods. Be careful, since not all chiller manufacturers test to the same standards.
    Key to chiller components:
    1. 2 -18" Condenser Fans
    2. Chilled Water Return -- 1 1/2" N.P.T.
    3. Water Level Sight Glass
    4. NEW Electronic Controls with digital display
      1. Temperature Set point
      2. Return and Discharge Temperature Displays
      3. High Temperature Alarm
    5. Power Disconnect
    6. Access Door
    7. Water Reservoir tank fill -- 1/2" N.P.T.
    8. Chilled Water Discharge -- 1 1/2" N.P.T
    Labeled Diagram of a chiller

    Chiller Specifications:
    Model Number: 1250 AC
    Capacity: 12.5 Ton
    BTU Per Hour: 150,000 BTU/hr
    Fluid Reservoir Capacity: 100 Gallons
    Fluid Circulating Pump: 3 HP
    Pump Specifications: 70 GPM at 38.0 psi
    Voltage: 460/3
    Amperage: 35.0
    Cabinet Size:
    (W x D x H)
    34 x 68 x 51 inches
    Weight: 1750 lbs.
    Do not overcharge this, or any, refrigeration system. The refrigeration sight glass is only an indicator of coolant being in the system. The sight glass should never be filled when charging the system, and will always be fuzzy. Overcharging the system will damage the compressor.